Cigarette & Trade Card Mounts

Cigarette card mounts for original cigarette card sets including mixed sets plus cigarette card mounts for reproduction sets. The widest and best selection of value cigarette card mounts available on the internet, all cut in acid free top quality mount board. Apertures are cut vertically so that cards sit in between and backs may be read. Cards will not sit properly in between cheap bevel cut mounts or thin die cut mounts. We will gladly design any cigarette card mount or trade card mount for you if you cannot see it here.

42 Products

( Show All )

Per Page

1 2 Next

Cigarette Card Mount - 10 Standard

Cigarette card mount for 10 original issue standard size cards 36x68mm. Cut with vertical edged apertures to hold cards securely between two pieces of glass so that the back of the cards may be read. Can be used either horizontally or vertically.

Customise & Buy

Cigarette Card Mount - 10 large

Cigarette card mount for 10 original large size cigarette cards 79 x 62 mm. Cut with vertical edged apertures to hold cards between two pieces of glass so that the back of the cards may be read. Can be used either horizontally or vertically.

Customise & Buy

Cigarette Card Mount - 20 Standard

Cigarette card mount for 20 original standard size cigarette cards 36x68mm. The cigarette card mount is cut with vertical edged apertures, holding cards between two pieces of glass so that the back of the cards may be read. Use vertically or horizontally.

Customise & Buy

Cigarette Card mount - 20 large

Cigarette card mount for 20 large large size cigarette cards 79 x 62mm. Cut with vertical edged apertures to hold cards between two pieces of glass so that the back of the cards may be read. Can be used either horizontally or vertically.

Customise & Buy

Cigarette Card Mount - 24 Standard

Cigarette card mount for 24 original standard size cigarette cards 36x68mm. Cut with vertical edged apertures to hold cards between two pieces of glass so that the back of the cards may be read. Can be used either horizontally or vertically.

Customise & Buy

Trade Card Mount - 24 British Automatic Co

Trade card mount for 24 British Automatic Co cards 54x29mm. Cut with vertical edged apertures to hold cards between two pieces of glass so that the back of the cards may be read. Can be used either horizontally or vertically.

Customise & Buy

Cigarette Card Mount - 25 Standard

Cigarette card mount for 25 original standard size cigarette cards 36x68mm. Cut with vertical edged apertures to hold cards between two pieces of glass enabling the backs to be read. Use either horizontally or vertically.

Customise & Buy

Cigarette Card Mount - 25 standard - 4H and 21V cards

Cigarette card mount for mixed set of 25 original standard size cigarette cards 36x68mm. Cut with vertical edged apertures to hold cards between two pieces of glass so that their backs may be read. Cards may not be in numerical order.

Customise & Buy

Cigarette Card Mount - 25 standard - 6V and 19H cards

Cigarette card mount for mixed set of 25 original standard size cigarette cards 36x68mm. Cut with vertical edged apertures to hold cards between two pieces of glass enabling the back of the cards to be read. Cards may not be in numerical order.

Customise & Buy

Cigarette Card Mount - 25 standard - 9V and 16H cards

Customise & Buy

Cigarette Card Mount - 25 Large

Cigarette card mount for 25 original large size cigarette cards 62x79mm approx. (Wills etc). Vertically cut apertures hold cards between two pieces of glass so that the back of the cards may be read. Use vertically or horizontally.

Customise & Buy

Cigarette Card Mount - 30 Standard

Cigarette card mount for 30 original standard size cigarette cards 36x68mm. Cut with vertical cut apertures to hold cards between two pieces of glass so that the back of the cards may be read. Use either way.

Customise & Buy

Cigarette Card Mount - 30 Large

Cigarette card mount for 30 original large size cigarette cards 52x60mm (suit Godfrey Phillips). This cigarette card mount is cut with vertical edged apertures to hold cards between two pieces of glass enabling the back of the cards to be read. Use either way.

Customise & Buy

Cigarette Card Mount - 30 Castella 6V 24H

Cigarette card mount for 30 original Castella cigar cards 55 x 85mm. Cut with vertical edged apertures to hold cards between two pieces of glass so that the back of the cards may be read. Can be used either horizontally or vertically.

Customise & Buy

Cigarette card Mount - 30 Godfrey Phillips

Cigarette card mount for 30 original Godfrey Phillips cigarette cards 52 x 60mm. Cut with vertical edged apertures to hold cards between two pieces of glass so that the back of the cards may be read. Can be used either horizontally or vertically.

Customise & Buy

Cigarette Card Mount - 36 standard - 29V and 7H

Cigarette card mount for mixed set of 36 original cigarette cards 36x68mm. Cut with vertical edged apertures to hold cards between two pieces of glass so that the back of the cards may be read. Cards may not be in numerical order.

Customise & Buy

Cigarette Card Mount - 38 Standard 6H32V

Cigarette card mount for 38 original standard size cigarette cards 36x68mm. Cofigured 6H by 32V. Cut with vertical edged apertures to hold cards between two pieces of glass so that the back of the cards may be read. Can be used either horizontally or vertically.

Customise & Buy